USB4 Interface Functionality Compatibility Update

Updated on Sept 30, 2025

Only applicable to IT12, IT13, GT12 Pro, GT13 Pro, XT12 Pro, XT13 Pro; must be run in Windows system.

After the update, Apple phones can be properly recognized when connected to the USB4 interface via a data cable, and some Android phones can also be recognized normally. The recognition rate for previously unrecognizable USB-C devices has also been significantly improved. The update process only takes a few minutes.

Tool File Download

Download link:USB4 FW_F0310

Video Guide

Text Guide

1.GEEKOM MiniPC has two USB4 ports, coded as 80 and 84 respectively, so you need to update twice. After the update is complete, select the other port and repeat the steps below.

2. Update file and program introduction

GEEKOM MiniPC has two USB4 ports, coded as 80 and 84 respectively, so you need to update twice. After the update is complete, select the other port and repeat the steps below.
Click GetVersion to get the current USB4 firmware version——USB4 old version is usually 0309
Click Load BinFile, select the new firmware file — Maita NUCAL02 IT8856 Test VF010
Click Update FW to start flashing the USB4 firmware
After the update is complete, click GetVersion again to retrieve the current USB4 firmware version, and confirm if it is F010. If so, it indicates that the update was successful.
After both interfaces have been updated, shut down the computer, unplug it, and restart to complete the process thoroughly.