How to Update GEEKOM EC Firmware via USB or Windows

Before you begin

• Use compatible firmware. Check that the package supports your exact device model and hardware revision. The IT13 and X14 Pro packages shown here are examples, not firmware for other models.
• Update BIOS and EC as a matched pair when recommended. This is especially important for laptops, because BIOS and EC work together. Use the paired releases provided for your model and follow any update order specified in the package instructions.
• Back up important data. Although EC updates generally carry less risk than BIOS updates, you should still back up important files and save your work before starting.
• Keep the power adapter connected. Do not disconnect power, force a shutdown, or manually restart the device during the update.
• If BitLocker is enabled, back up your recovery key and suspend protection before updating firmware or changing Secure Boot settings. Resume protection afterward. See the BitLocker instructions.

Method 1: Update EC from a USB flash drive

1. Prepare the USB drive and copy the files

1. Prepare a USB flash drive formatted as FAT32. If you need to format it, back up its contents first. Formatting erases the files on the drive.
2. Fully extract the USB EC update package for your model.
3. Copy all extracted files and folders to the USB drive’s root directory—the first location you see when you open the drive. Do not place them inside an extra outer folder, or delete or modify files in the package.

In the IT13 example, the USB drive’s root directory contains the CE y EFI folders, an EFI application, and the startup.nsh script, as shown below.

IT13 example: copy every file and folder, preserving the original structure.

2. Disable Secure Boot

Disable Secure Boot before selecting the USB drive as the boot device. Otherwise, a Secure Boot warning may prevent the update program from starting. If Secure Boot is already disabled, leave it as it is.

1. Restart the device and repeatedly press Del during startup to enter BIOS Setup.
2. Go to Security → Secure Boot and set Arranque seguro to Disabled. The menu location may vary by model.
3. Seleccione Save & Exit and confirm the changes. If using a shortcut key, follow the key shown on your BIOS screen.

Set Secure Boot to Disabled and save the changes before booting from USB.

3. Boot from the USB drive

1. Insert the prepared USB drive and restart the device.
2. Repeatedly press F7 during startup to open the boot device menu.
3. Use the arrow keys to select the USB drive’s UEFI entry, then press Entre en. The screenshot shows UEFI: SanDisk; your drive may have a different name.

Select your USB drive’s UEFI entry, not Windows Boot Manager or a network boot entry.

4. Wait for the automatic update

The update script starts automatically after the device boots from USB. When the countdown appears, wait for it to continue. Do not press Esc to skip startup.nsh.

The update script starts automatically. No commands need to be entered.

The screen then shows the erase, programming, and verification stages. The update usually takes about 3 minutes, but the actual time may vary. Wait for the process to finish; do not turn off the device just because 3 minutes have passed.

Update in progress: the final Verify stage has not yet shown a completion result. Keep waiting.

5. Wait for the device to restart or shut down

After the update process finishes, the device may restart or shut down automatically. Check the power indicator before taking the next step:

If the device restarts automatically into the operating system, remove the USB drive after startup. A laptop’s first restart may take about 5 minutes.

These actions apply only after the update process has ended. A black screen or power indicator alone does not confirm a successful update. You must also verify the EC version.

Method 2: Update EC in Windows

1. Fully extract the update package

Fully extract the Windows EC update package for your device. Package contents vary by model. Both examples below support Windows updates, but they are not interchangeable between models.

IT13 example: keep IFU.exe, EC.bin, the DLLs, and all other supporting files together.

X14 Pro example: use the program supplied in your package. Names and version numbers may differ.

2. Run the updater as administrator

Save your work and close other applications. In the extracted folder, right-click the appropriate update program and select Run as administrator.

IT13 example: run IFU.exe as administrator. Use the same launch method for the laptop updater.

3. Wait for the update and automatic restart

The updater will begin the EC update. The screenshot below shows the IT13 progress window. In this example, you do not need to select a firmware file or click other buttons.

EC update in progress. The 50% shown here is only an example; wait for completion.

Keep the power adapter connected. Do not close the updater, shut down the device, or restart it manually. When the update finishes, the device will restart automatically. Wait until the Windows desktop appears.

The laptop procedure is similar: run the supplied updater as administrator, then wait for the update and automatic restart. The first restart may take about 5 minutes; this is normal.

Verify the EC version and finish

1. Check the installed EC version

After the device starts normally, use either method below to check the EC version. It must match the target version of the package you used. A version change alone does not confirm that the correct firmware was installed.

In Windows: press Win + R, enter msinfo32, and press Enter. Under System Summary, find Embedded Controller Version.

Find Embedded Controller Version. The 0.31 shown in this demonstration is only an example; this and the BIOS screenshot below are separate demonstrations.

For another operating system, or if the version is unavailable in Windows: restart the device and repeatedly press Del during startup to enter BIOS Setup. Find EC Version on the Main page.

BIOS example: 0.32 is the version on this device, not a target version for every model.

2. Shut down and reconnect power after confirming success

1. Wait for the first startup to finish and confirm that the installed EC version matches the update package.
2. Shut down the device normally. Remove the USB drive after shutdown if it is still connected.
3. Unplug the power cable and plug it back in; no additional waiting period is required. Press the power button to start the device. For a laptop, disconnect and reconnect the power adapter.

Do not disconnect power while the update or first restart is still in progress.

3. Restore any settings changed for the update

• If Secure Boot was originally enabled and you disabled it for the USB update, enable it again after completing the update.
• Resume BitLocker and security protection if you paused them.

Troubleshooting

Filenames, version numbers, chip information, and screens in this guide are examples. Actual details may vary by model and update package.