IT15 Update EC Tutorial

Updated with July 17, 2025

---

Preparing Tools

---

Video Tutorial

---

Text Tutorial（3 minutes）

1.Confirm the current firmware version

• On your desktop, press the Win + R keys to open the Run dialog box.

• Type msinfo32 and press Entre en.

• In the System Information window that appears, look for the EC Version (usually listed under “System Summary” or a related hardware section).

• Verify if the EC version is 1.06 or note the version displayed.

2.Create a bootable USB for updating EC（3 minutes）

• Download the EC file from the GEEKOM Support website——https://service.geekompc.com/it15/

• After extracting the compressed file, place the contents of the folder onto the USB drive.Creation completed

---

Procedure（3 minutes）

• Do not turn off or unplug the power during the update process.

• Shut down，and reinsert the USB drive

• Press the power button to start the computer and repeatedly press the F7 key until the interface below appears.

• Use the keyboard arrow keys to select the inserted USB drive for booting (the device starting with “UEFI“) and press Entre en to confirm.

• From the interface below, simply press Enter repeatedly to confirm, and the automatic flashing process will begin.

• Wait for the progress bar to complete. The machine will automatically shut down after a successful update. At this point, unplug and reconnect the power cable, then turn it on again.

• After powering on, check the EC version again. The updated file version is now 1.07—update successful!

---

Gracias por vernos. Si hay algún error, sus correcciones son bienvenidas.